Vittoria Ultra Light Speed TPU Tube FV RVC

VITTORIA ULTRA LIGHT SPEED TPU INNER TUBE

• Featherlight Weight: Weighs only 30 grams.

• Ready for Mishaps: Includes a dedicated Repair Kit.

• Disc Brake Only: Strictly compatible with disc brake road bikes only.

• Uncompromised Performance: Compared to Vittoria standard butyl tubes, it is 14% faster (lower rolling resistance), 70% lighter, and boasts superior puncture resistance and material stiffness.

⚠️ Crucial Installation Warnings for Vittoria TPU Inner Tubes

IMPORTANT: NEVER inflate the TPU inner tube while it is outside the tire and rim (open inflation). Exceeding 0.5 bar / 7 psi during open inflation will cause permanent local ballooning and irreversible deformation, rendering the tube unusable!

Correct Installation Procedure:

1. Minimal Inflation First: Before inserting the tube into the rim and outer tire, inflate it only slightly (Maximum 0.5 bar / 7 psi). The tube should have just enough air to hold its round shape.

2. Seat & Align: Insert the tube, then gently press and adjust it to ensure it sits smoothly against the inner wall of the tire.

3. Verify Placement: Double-check that the inner tube is completely tucked inside the tire and rim bed, and ensures that it is not pinched or trapped by the tire bead.

4. Final Inflation: Only after verifying there is absolutely no tire pinching (zero pinch) can you proceed to pump the tire to your normal riding pressure.

Here is the complete, professionally translated English version of your product description and specification table for the Vittoria Ultra Light Speed TPU Inner Tube:

INNER TUBES

The ultimate racing inner tube.

The lightest and fastest inner tube on the market, purpose-built for Road Racing and BMX. Achieve ultimate speed while retaining the practical convenience of a standard clincher setup. The ultra-lightweight TPU construction reduces rolling resistance by 14% and slashes weight by 70% compared to traditional butyl tubes—delivering an unrivaled blend of performance gains and cost-effectiveness.

When used on road bikes, this inner tube is strictly compatible with disc brake systems only. For BMX categories (Racing and Pump Track), it can be safely used on bikes equipped with rim brakes.

Weighing as little as 30 grams with an ultra-thin profile of just 0.3 mm, it ensures extreme weight savings, exceptional elasticity, and significantly enhanced rolling performance and ride comfort.

Features a Presta valve equipped with a signature red TPU valve stem and a Removable Valve Core (RVC) made of stainless steel.

• Crafted from fully recyclable Thermoplastic Polyurethane (TPU).

• Engineered specifically for disc brake systems (BMX sizes are exclusively compatible with rim brakes).

• Includes a dedicated repair kit to extend product lifespan.

⚠️ Installation Notes:

Due to its ultra-lightweight and highly flexible nature, TPU inner tubes require meticulous care during installation (please refer to the installation and inflation guidelines inside the packaging).

Because TPU material undergoes irreversible stretching, never reuse a previously inflated TPU tube in a narrower tire width. When swapping to a narrower tire, always use a fresh, new inner tube.

Specifications (Size / Valve Type / Weight)

• RVC: Removable Valve Core

• FV: French Valve (Presta)