Super B

•One end wrench engages 16 notches of bottom bracket cups. •Disassemble and install Shimano® Hollowtech II, Truvativ® GXP, FSA® MegaExo, Campagnolo® Ultra-Torque,...

•The socket can increase contact area between wrench and B.B. shell, especially for lightweight B.B. •Disassemble and install Shimano® Hollowtech II, Truvativ® GXP, FSA®...

•Adjustable torque wrench with dial for easy setup.•Available for both direction in clockwise and counter-clockwise. •Includes bit sockets: hex 2 / 2.5 / 3 / 4 / 5 / 6 / 8 / 10...

•Features with a precision chain checker can quickly and accurately indicate if the wear and stretch of the chain needs replacement.•Made of stainless steel by accurate laser cutting...

•Super B patented to remove crank arms for both standard square type and Shimano® octalink, ISIS Drive® system, Power Spline or Power Drive bottom bracket interface.•Fine thread and...

•Patent and award-winning design, the 2 in 1 master link pliers that allows master links installed and removed by single hand.•Bold and simple is our philosophy. No complicated structure...

•3 / 4 / 5 / 6 mm hex key wrench. •Phillips 2 and slotted 6 screwdriver.•5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 mm box.•Bottle opener, Torx® 25 / 30.•Spoke...

•2.5 / 3 / 4 / 5 / 6 mm hex key wrench.•Phillips 2 screwdriver. •5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 mm box.•Bottle opener, Torx® 25.•Chain rivet extractor...

Center grip made from “Thermoplastic Rubber” for comfort. Made from high grade steel and heat-tr•Updated the structure of steel to stand with higher torque applied...

•Optional for TB-1940 disc brake mount facing tool.•Works with 12 mm or 15 mm thru axle.

•Engages 8 internal splines of the crank arm adjustment cap. •Use with 6 mm hex key to remove and install crank arm adjustment cap. •Spec:TB-8911: Material - nylon.TB-8911A: Material...

•Steel core covered with nylon prevents spoke damaged.•A ring design makes easier and more stable operation when wearing in on the finger.•For 0.9 / 1.1 / 1.3 / 1.9 mm.

•Precision-sized spoke wrench for nipple size 3.2 / 3.3 / 3.5 / 4.0 mm.•Made of stainless steel with heat treated for durability.•B-shaped represents Super B philosophy: Super B...

•Install and remove 12-notch external bearing bottom brackets. 12 notch 46mm OD cup to install and remove SRAM® DUB™ Race Face® Cinch™, Rotor® BSA30, Zipp®...

•To install and remove 6-notch cartridge cups on Campagnolo® ( VeloceTM, MirageTM, CentaurTM, DaytonaTM and AvantiTM ) sealed cartridge bottom brackets. •Vinyl coated handle is...

Super B Premium for press fit bottom bracket BB 86/90/92/95, BF 30 (24 mm axle) operating almost without wear by wide contact area for easy removal of press fit bottom...

Designed for mini-wheel bike, especially for longer head tube.•Optional part for TB-1935, available extension 350 mm, can support head tube of maximum 600 mm.

Brush is designed w/o teeth cog to reduce the resistance when chain is feeding through the chain cleaner. 2 side plates are removed to help to observe clearly when chain is getting through...

Designed to set the proper pad gap and align with hydraulic and mechanical brake caliper. Accurate to align the brake caliper on disc brake system.

•Features a guide pin to work more stable. •Made from CNC machined heat-treated high grade steel. •Suitable for Shimano®, ISIS Drive® splined 20-tooth bottom bracket...

•A quick-release lever design to keep the chain under tension when the wheel is removed.•Features to avoid chain tangled and frame scratched. •Available for axle 9 mm rear dropout...

Innovation tool keeps chain tensioned at rear dropout when the wheel is removed. Avoids the chain tangles and frame damaged while transporting the frame without wheel. Adjustable design fits 130...

•A quick-release lever design to keep the chain under tension when the wheel is removed.•Features to prevent chain tangled and frame scratched. •Available for axle 9 mm x 130 mm...

•Specifically designed for 10 & 11 speed chains.•The patent designed chain pin guider (B-shaped part) and ergonomic design make removal and installation a breeze.•With 1 spare pin...

•Maintain chain tension on rear dropout.•Available for all speed chain.

Double-ended economical chainring nut wrench is used to tighten or loosen chainring nuts and securely holds the slotted nut to prevent spinning. Fit most slotted-type nuts. Includes box wrench 9...

•Heavy duty and high quality machining tool is for milling both the outer edge and lower surfaces of the crown race seat, ensuring a smooth, accurate cut andproper alignment of the fork in...

•The heavy duty driver tube and specially-sized aluminum setting rings can safely, quickly and precisely install crown races.•Spec: TB-1938: includes 6 rings for most 1" and 1-1/8"...

•Spare parts for TB-1169.•Set of 2 pcs.

The versatile digital scale is designed to measure accurate weight of bikes, frames and components. Perfect to work with Super B work stands. Measures weight range from 20g ~ 50 kg with kg / lbs...

  Description •Solid locking handle fixes on sprocket easily. •Super B patent jaw cogs 10-23 teeth 5~12 speed sprocket firmly and easily. •Single hand operating makes the...

Features with a guide pin to work more stable. Suitable for Shimano®, SunRace®, SRAM®, Chris King®, SunTour®, other cassette lockrings and some Shimano® disc brake system...

•Features a guide pin to work more stable. •Removes Shimano®, SunRace®, SRAM®, Chris King®, SunTour® and other cassette lockrings and some Shimano® disc brake...

Freewheel turner for 10-12 speed freewheels The premium freewheel turner fits 10-12 speed cassettes. Use with freewheel remover, such as TB-FW36 / TB-FW30 / TB-CP15 / TB-1445 / TB-1465, to loosen...

For 1", 1-1/8" press fit internal cup and 1-1/2" press fit external cup.

TB-1936: for 1", 1-1/8" and 1-1/4" press fit external cup.TB-1937: for 1", 1-1/8" press fit internal cup and 1-1/2" press fit external cup.TB-1941: for 1-1/4" and 1-1/2" press fit internal cup.